Back to top

2019 Crevalle 24 Bay

Pompano Beach, Florida

2019 24 SE by Crevalle boats powered by a 250 Yamaha  NCA. Left over model must go!!! Along with all the standard features in the 24SE the dealer selected options include : Underside Tan colored t-top, black powder coating coffee-n- cream interior color, digital motor option and trim tabs.

Designed by fisherman to be the most family friendly bay boat on the market. Unlike Crevalle, many bay boat manufacturers have focused on the fisherman, neglecting to adequately provide necessary family comfort features. From our 2 removable 72 quart coolers and in-console porta pottie, to the forward seating package and the removable ski pylon, Crevalle has not forgotten the family! Nor have we forgotten the serious fisherman: 2 release wells, 1 bait well, lockable rod storage for 10 rods, dedicated anchor storage, and in deck cast net storage are just a few of the items every fisherman will get.

 

Features may include:

Hull and Deck

  • No wood construction
  • Coal tar epoxy coated fuel tanks
  • 10 Year Hull Warranty
  • Black rub rail with Stainless Steel Insert
  • Composite Transom
  • Dedicated Anchor Locker
  • Position Control Hinges on all Hatches
  • Fiberglass Hatches Finished on both sides
  • NMMA Certified using ABYC Standards
  • Self Bailing cockpit
  • Single Piece Fiberglass Stringer System with foam flotation
  • Forged Stainless Steel thru hulls with duckbill valves
  • Integrated swim platform with 3-step fold-out stainless swim ladder
  • 6? Engine Jack Plate for Improved performance & economy
  • Marelon Seacocks (Composite material, no corrosion or electrolysis)
  • Anti-Venturi thru-hull fittings (Allows pumps to operate at speed)
  • Hidden deck drains with stainless covers and duckbill valves
  • Welded one piece stern eyes
  • Deep cockpit for a safe dry ride
  • Yacht Grip, non-skid deck
  • Setback transom provides full aft deck
  • Powdercoated Aluminum pipework
  • Vertical rod holders on side of helm (without t-top)

Release Wells (Two)

  • 28 Gallon aft release wells
  • Venturi aeration bubbler
  • Dual jets
  • Protected overflow stand pipe
  • CommercialAquarium type aeration

Bait Well (One)

  • Single jet aeration
  • 12 Gallon Forward well
  • Overflow fitting with filter dome

All Wells

  • Blue gel coat
  • Attwood 800 gph, dual port aeration pumps
  • Insula

Basic Boat Info

Make: Crevalle
Model: 24 Bay
Year: 2019
Condition: New
Category: Power
Construction: Fiberglass

Dimensions

Length: 23'6 ft
Length Overall: 23'6 ft
Beam: 8'6 ft
Max Draft: 1 ft
Dry Weight: 3,200 lb
Deadrise: 16 °

Engines / Speed

Engines: 1
  • Fuel: Unleaded
  • Type: Outboard

Tanks

Fuel Tanks: 1
Fuel Tank Capacity: 70 gal

Other

Maximum Number Of Passengers: 8
Heads Count: 1
Boat Class: Bay Boats, Saltwater Fishing, Center Consoles
More Info : Crevalle Website

Contact

Boat World

Office

Boat World
1260 N Federal Hwy
Pompano Beach, Florida, US, 33062
Tel:8883265657
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


Hull and Deck
  • No wood construction
  • Coal tar epoxy coated fuel tanks
  • Single Piece Fiberglass Stringer System with foam flotation
  • 10 Year Transferable Hull Warranty
  • Black rub rail with Stainless Steel Insert
  • Composite Transom
  • Dedicated Anchor Locker
  • Position Control Hinges on all Hatches
  • Fiberglass Hatches Finished on both sides
  • NMMA Certified using ABYC Standards
  • Self Bailing cockpit
  • Forged Stainless Steel thru hulls with duckbill valves
  • Integrated swim platform with 3-step fold-out stainless swim ladder
  • Standard 6” Engine Jack Plate (24SE not included) combined with notched transom allows our boats to leap on plane in shallow water with no propeller cavitation.  The notch provides so much water to the engine pickup that the engine can be run all the way up on the jack plate without fear of overheating the engine.
  • Marelon Seacocks (Composite material, no corrosion or electrolysis)
  • Anti-Venturi thru-hull fittings (Allows pumps to operate at speed)
  • Hidden deck drains with stainless covers and duckbill valves
  • Welded one piece stern eyes
  • Deep cockpit for a safe dry ride
  • Yacht Grip, non-skid deck
  • Setback transom provides full aft deck
  • Integrated swim platform with fold out ladder
  • Vertical rod holders on side of helm (Non-Hard top boats)
  • Under gunwale rod storage for (2) 8′ rods each side
  • Forward rod lockers with room for (5) 7′-6″ rods on each side
  • 40″ wide flip up aft seat
  • Bow Dry storage
  • (2) removable 72 quart coolers
  • (6) Custom Crevalle pull-up cleats
  • (8) stainless cup holders 6 are LED illuminated
  • Port and Starboard in-gunwale safety gear storage
  • Digital Instruments (Yamaha , Mercury Vessel View 4, E-Tech iCommand)
  • Floor storage for 5 Gallon Bucket
  • Custom aluminum Leaning post with backrest, rigging tray, (4) rod holders, and (2) stainless cup holders, and storage bin
  • Unobstructed aft fishing deck
  • Pre wired 8 AWG wiring for trolling motor
  • Trolling motor plug panel with trim switch
  • Custom flat bar grab rails molded into the deck
  • Attwood 1100gph automatic/manual bilge pump
  • Fuel Water separator
  • Wet Sounds Speakers
Release Wells (2)
  • Insulated 28 Gallon aft release wells
  • Venturi aeration bubbler
  • Dual jets
  • Protected overflow stand pipe
  • Commercial Aquarium type aeration
  • Blue gel coat
  • Attwood 800 gph, dual port aeration pumps
  • Check valves on intake plumbing to prevent water level from dropping while at speed.
  • LED lighting
Bait Well (1)
  • Adjustable aeration jet can be closed to convert baitwell into fully insulated cooler
  • Wide opening allows easy access for cast nets
  • Side mounted overflow fitting with removable filter dome means no stand pipe to get in the way of netting bait.
  • Blue gel coat
  • Sealed lid with double gasket prevents slosh at high speeds and during turns
Helm
  • Storm Cloud Grey gelcoat face to eliminate secondary glare
  • Space for a 12” GPS Multifunction Display, VHF and Stereo
  • Deluxe stainless steering wheel with power knob
  • Integrated, LED lit, dual height, nonskid foot rests
  • Welded 316 stainless steel console grab rail
  • Compass
  • Dual Note Stainless Horn
  • Digital engine gauges
  • Portside helm door
  • Backlit switch and gauge panel
  • Dual illuminated stainless cup holders
  • Console door with trash bag holder
  • Individual circuit breakers
  • LED lighting inside storage
  • JBL Bluetooth ready stereo, with USB/MP3 port
  • Integrated engine data on electronics options (when ordered)
  • Sea Star solutions hydraulic steering with tilt helm
  • Console Rod holders with hook/knife/plier holders
  • Helm panel with lighted toggle switches, and backlit function labels
Technical Standards

 

  • Tinned copper wiring with functions printed every 12″ on every wire
  • LED cockpit lighting throughout, blue or white selectable
  • Deutsch plugs on harnesses
  • Sealed Bussbars
  • Heat shrink electrical terminals
  • Circuit breakers (not fuses)
  • 8 AWG trolling motor harness
  • Remote trim switch at bow
  • No visible fasteners on panels
  • Helm mounted dual battery switch
  • LED Navigation lights
  • Deluxe battery hold down trays
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


Request a quote from the seller to get a price.

Request Price